Icom IC-M402A Instruction Manual page 29

D Transmitting Position Request call
Transmit a Position Request call when you want to know a
specified ship's current position, etc.
q Push [DSC•
] to enter the DSC menu.
IC
w Push [Y] or [Z] to select "
[DSC• ].
IC
e Push [Y] or [Z] to select the desired pre-programmed in-
dividual address.
• The ID code for position request must be set in advance. (p. 15)
," then push
Scrolls
r Push [DSC•
] to enter the standby condition for Position
IC
Request call.
• Channel 70 is selected and "
t Push [DSC•
] to transmit the Position Request call.
IC
y After the Position Request call has been transmitted, the
following indication is displayed.
• " " scrolls at the channel comment indicator.
u Push any key to exit the condition and return to the nor-
mal operation.
6
DSC OPERATION
" appears.
Scrolls
6
23