I Call Channel Programming; I Lock Functions - Icom IC-M402A Instruction Manual

11
COMMANDMIC

I Call channel programming

q Push [CH/WX•
DW
times while pushing [H/L] to select
the desired channel group (USA,
INT, CAN) to be programmed.
w Push [16•
] for 1 sec. to select call
9
channel of the selected channel
group.
• "CALL" and call channel number ap-
pear.
e Push [16•
] again for 3 sec. (until
9
a long beep changes to 2 short
beeps) to enter call channel pro-
gramming condition.
• The channel number and channel
group to be programmed blinks.
r Push [Y Y ]/[Z Z ] to select the desired
channel.
t Push [16•
] to program the dis-
9
played channel as call channel.
• The channel number and channel
group stop blinking.
44
®
HM-127
] several
U/I/C

I Lock functions

The Lock function electronically locks keys and switches to
prevent accidental changes and function access from the mi-
crophone.
• All keys, switches and controllers on the transceiver are functional.
D D Activating the Lock function
➥ While pushing [H/L], push
[SQL• ] to turn the Lock
L
MONI
function ON or OFF.
• " " appears.
• Only [PWR], [PTT], [H/L],
], [VOL]+[Y Y ]/[Z Z ]
[SQL•
L
MONI
and [SQL]+[Y Y ]/[Z Z ] are func-
tional.
D D Activating the All key lock function
➥ While pushing [H/L], turn the
power ON by pushing [PWR]
to turn the All key lock function
ON or OFF.
• " " blinks.
• Only [PWR] and [PTT] are func-
tional.
Appears when the lock
function is in use.
Blinks when the all lock
function is in use.