Icom IC-M402A Instruction Manual page 45

Icom ic-m402a radio-marine: instruction manual
Table of Contents

Advertisement

r CHANNEL/DUALWATCH/TRI-WATCH KEY
[CH/WX•
]
U/I/C
DW
➥ Selects and toggles the regular channels and weather
channel when pushed momentarily. (pgs. 6, 7, 42)
➥ While pushing [H/L], selects one of three channel
groups in sequence when pushed. (pgs. 7, 42)
• International, U.S.A. and Canadian channels are available.
➥ Starts Dualwatch or Tri-watch when pushed for 1 sec.
(pgs. 11, 45)
➥ Stops Dualwatch or Tri-watch when either is activated.
t ATTENUATOR/INTERCOM/SCRAMBLER KEY
[LO/DX•
]
SCR
IC
➥ Activates the Intercom function when pushed for 1 sec.
(pgs. 29, 48)
➥ Calls the IC-M402A when pushed and held while in In-
tercom mode. (pgs. 29, 48)
NOTE: RF attenuator and voice scrambler are not avail-
able for IC-M402A.
COMMANDMIC
y SQUELCH/MONITOR/LOCK KEY [SQL•
➥ [Y Y ]/[Z Z ] sets the squelch threshold level after pushing
[SQL]. (p. 43)
➥ Push [SQL•
] for 1 sec. to turn the monitor func-
L
MONI
tion ON. (p. 45)
➥ While pushing [H/L], push [SQL•
(microphone) Key lock function ON or OFF. (p. 44)
• " T " appears while (microphone) Key lock function is in use.
• [PWR], [PTT], [VOL], [SQL] and [H/L] still function when the
(microphone) Key lock function is turned ON.
➥ Advance the cursor while in channel comment pro-
gramming condition. (pgs. 10, 48)
u VOLUME/DIMMER KEY [VOL•
➥ [Y Y ]/[Z Z ] adjusts the audio level after pushing [VOL]
(p. 43)
➥ [Y Y ]/[Z Z ] adjust the brightness of the LCD and key back-
light after pushing [VOL•
➥ Move the cursor backward while in channel comment
programming condition. (pgs. 10, 48)
11
®
HM-127
]
L
MONI
] to toggle the
L
MONI
]
DIM
] for 1 sec. (p. 45)
DIM
11
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic-m402sa

Table of Contents