Unloading; Serial Plate Location; Exterior Loading; Merchandisers Shipped With End Installed - Hussmann Impact Excel M5X Installation And Service Manual

I
1-2
NSTALLATION

UNLOADING

Improper handling may cause damage to the
merchandiser when unloading. To avoid damage:
1. Verify that adjustable feet are fully inserted
and securely positioned into the legs.
2. Do not drag the merchandiser out of the
trailer. Use a Johnson bar (mule).
3. Use one dolly to remove the merchandiser
from the trailer.
4. Use two dollies to move cases to lineup.

SERIAL PLATE LOCATION

Direct a flashlight through the return air grille to
locate the serial plate. B
ISLAND MERCHANDISER FRONTS PROPERLY
front of wide island merchandisers is readily
identified by the location of the serial plate
affixed to the inside of the left front assembly.
Since all electrical and refrigeration connections
will be made at the front side, the fronts will need
to be positioned according to the store plan lay-
out.
P/N 0463880_E
E SURE TO POSITION WIDE
. The
Serial Plate Behind
Return Air Grille

EXTERIOR LOADING

Do NOT walk on top of merchandisers or
damage to the merchandisers and serious
personal injury could occur. T
STRUCTURALLY DESIGNED TO SUPPORT EXCESSIVE
such as the weight of a
EXTERNAL LOADING
person. Do not place heavy objects on the case.
MERCHANDISERS SHIPPED
WITH END INSTALLED
If the case was shipped with the end installed,
two long bolts were used to hold the shipping
brace to the end. If the shipping bolts are
reinserted after removing the brace, they will
extend into the product area. T
SURE TO REPLACE THESE BOLTS WITH THE SHORTER
. NSF requires any bolt or screw
BOLTS PROVIDED
in the product area be capped or cut off if it has
more than three exposed threads.
NOTE:
Be careful not to damage the factory installed
end while moving the case. Make sure that
tools are positioned past the end and beneath
the merchandiser's support bar.

SHIPPING BRACES

Move the merchandiser as close as possible to its
permanent location and then remove all packag-
ing. Check for damage before discarding packag-
ing. Remove all separately packed accessories
such as kits and shelves. Remove end braces and
discard hardware.
WARNING
!
Do NOT remove shipping braces until
the merchandisers are positioned
for installation.
HEY ARE NOT
,
HEREFORE BE
. .
WWW HUSSMANN COM