S
6-2
ERVICE
REPLACING LED CANOPY LIGHT BARS
There are always two rows of canopy LED lights.
The rear light bar illuminates the upper section of
the case and the front light bar illuminates the
lower section of the case. The front and rear light
bars are labeled
FRONT
have a different shaped lens. They shall not be
interchanged.
The light bars are attached to the lamp panel
using clips. When replacing clips ensure that the
part number of the clip is the same as the original
clip. The clips are color coded to simplify identi-
fication of the proper clip to be used.
Light Bar Clips
P/N 0463880_E
and
respectively and
REAR
The light bars are connected through a two-
conductor connector. Push on the release tab on
the connector, then pull down on the connector.
Do not pull on wires. LED power source is
24-volts for safety.
Canopy LED Light Connector
.
.
WWW
HUSSMANN
COM