Removing Interior Back Panels; Removing Scratches From Bumper - Hussmann Impact Excel M5X Installation And Service Manual

M
5-4
AINTENANCE

REMOVING INTERIOR BACK PANELS

The interior back panels may be removed for
cleaning and to gain access to the evaporator
coils. Remove the rear interior back panels as
follows:
1. D
ISCONNECT THE ELECTRICAL POWER TO THE
.
MERCHANDISER
2. Remove shelving.
3. Remove the lower panel first: lift the panel
up, then pull forward and out.
4. Remove the top panel.
5. Replace panels in reverse order, starting with
the top panel.
6. After cleaning or servicing the
merchandiser, reconnect the
electrical power.

REMOVING SCRATCHES FROM BUMPER

Most scratches and dings can be removed using
the following procedure.
1. Use steel wool to smooth out the surface area
of the bumper.
2. Clean area.
3. Apply vinyl or car wax and polish surface for
a smooth glossy finish.
P/N 0463880_E . .
WWW HUSSMANN COM