Unloading; Serial Plate Location; Exterior Loading; Merchandisers Shipped With - Hussmann BEXDWG Installation & Operation Manual

Low temperature
Table of Contents

Advertisement

I
1-2
nstallatIon

UNLOADING

Improper handling may cause damage to the
merchandiser when unloading.
To avoid damage:
1. Do not drag the merchandiser out of the
trailer. Use a Johnson bar (mule).
2. Use one dolly to remove the merchandiser
from the trailer.
3. Use two dollies to move cases to lineup.

SERIAL PLATE LOCATION

Direct a flashlight through the return air grille
to locate the serial plate.
The front of the merchandiser is readily
identified by the location of the serial plate
affixed to the inside of the left front assembly.
Since all electrical and refrigeration connections
will be made at the front side, the fronts will
need to be positioned according to the store
plan layout. A secondary serial number sticker
is put on the exterior nosing on the discharge
side. It provides the model, serial number and
manufacture date.
BEXDW8G
Serial Plate Behind Return Air Grille and Interior Rear Panel
P/N 3093114_A

EXTERIOR LOADING

Do NOT walk on top of merchandiser because
damage to the merchandiser and serious
personal injury could occur. T
noT sTrucTurally designed To supporT
excessive exTernal loading
weight of a person. Do not place heavy objects
on the merchandiser.
MERCHANDISERS SHIPPED
WITH END INSTALLED
Be careful not to damage the factory installed
end while moving the merchandiser. Make sure
that lifting tools are positioned past the end
and beneath the support bar.

SHIPPING BRACES

Move the merchandiser as close as possible
to its permanent location and then remove all
packaging. Check for damage before discarding
packaging. Remove all separately packed
accessories such as kits and pan displays.
Remove end braces, and discard hardware.
Exercise caution at all times when moving
merchandisers with up-tilt riders. They are top-heavy
and should never be left in the vertical position.
AVOID SERIOUS PERSONAL INJURY. Up-tilt
riders are top-heavy and may fall over.
Never leave uptilt rider in vertical position.
Use caution when moving.
Do not remove shipping braces until the
merchandisers are positioned for installation.
Do not stand or walk on top of merchandiser
because falling off could cause personal injury.
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
hey are
such as the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bexdw8gExcel series

Table of Contents