Model Description; Unloading; Exterior Loading; Shipping Skid - Hussmann SM-115W Installation & Operation Manual

P/N 2400205_J

MODEL DESCRIPTION

SM models are open-top merchandisers,
designed for low temperature operation.
These models are designed with a cold wall
refrigeration system. The air circulation inside
the merchandiser is provided by natural
convection.

UNLOADING

Unloading from Trailer:
Use a Lever Bar (also known as a Mule,
Johnson Bar, J-bar, Lever Dolly, or Pry Lever).
Move the merchandiser as close as possible to
its permanent location and remove all packaging.
Check for damage before discarding packaging.
Remove all separately packed accessories such
as kits and shelves.
Improper handling may cause damage to the
merchandiser when unloading. To avoid damage:
1. Do not drag the merchandiser out of the
trailer. Use a Johnson bar (mule).
2. Use a forklift or dolly to remove the
merchandiser from the trailer.
Do NOT stand or walk on top of
merchandiser. Do not store items or
flammable materials atop the unit.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.

EXTERIOR LOADING

Do NOT walk on top of merchandisers or
damage to the merchandisers and serious
personal injury could occur.
merchandisers are not structurally
designed to support external loading
as the weight of a person. Do not place heavy
objects on the merchandiser.

SHIPPING SKID

Each merchandiser is shipped on a skid to
protect the merchandiser's base, and to make
positioning the case easier.
Remove the skid by raising one end of the
merchandiser approximately 6 inches. Block the
merchandiser securely, and remove the two skid
bolts from the raised end. Replace the bolts
with (provided) casters. Repeat this procedure
at opposing end. Once the casters are secured in
place, the merchandiser may be slid off the skid
and placed in its final location.
DO NOT TILT MERCHANDISER ON ITS
SIDE OR END WHEN REMOVING SKID.
Once the skid is removed, the merchandiser
must be lifted —NOT PUSHED— to reposition.
Check floor where merchandisers are to be set
to see if it is a level area. Determine the highest
part of the floor.
Do NOT remove shipping crate until the
merchandiser is positioned for installation.
SM Spot Merchandisers
1-3
such