P/N 0463880_E
1. SHUT OFF POWER TO CASE. REMOVE
ALL SHELVES.
2. Engage each power socket cap and ensure
that each cap is fully seated before cleaning.
Ensure the proper seating of the cap at all
times when the plug is not engaged.
R
I
G
H
T
3. Clean the merchandiser as described in the
Care and Cleaning paragraphs of Section 5 –
Maintenance. Keep liquid out of sockets.
4. Verify that power is at the case and turned on.
Verify that the case light switch is turned
"OFF." Switch is located in the canopy, on
the left, behind first row of lamps.
Socket with Cap Installed
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
W
R
O
N
G
Light Switch Location
5. See the illustration below. It is typical of
D5X, C5X, and D6X models. Note that other
models will have fewer rows of shelves.
Starting from the left-hand bottom section,
choose the location for the first shelf, X-1.
Secure the shelf in the slotted upright. Make
certain that the shelf is level and that ends are
in the same slot on the left and right upright.
It is important that shelf brackets be proper-
ly seated in the slotted upright.
10 Sockets in
8-ft Case
X-13
X-10
X-7
X-4
X-1
Always work Left to Right,
and Bottom to Top
Medium Temperature
15 Sockets in
12-ft Case
X-15
X-14
X-12
X-11
X-9
X-8
X-6
X-5
X-3
X-2
Excel
4-3