Through - Hussmann Impact Excel M5X Installation And Service Manual

P/N 0463880_E
4. Install End Splashguard
a. Insert back of bracket through slot in leg.
Use Screws to attach End Splashguard
Retainers to end frame. Note: not all models
have two brackets per leg.
End
Splashguard
Brackets
Screw
1
SM 8-18x /
2
Hex Head
b. Align forward edge of End Splashguard
with front splashguard, with lower edge
resting on floor. Fasten End Splashguard to
bracket with Screws.
c. Slip End Splashguard Cover under end
assembly. Fasten to end splashguard and
upper brackets with Screws.
End
Splashguard
Cover
Standard
End
Splashguard
Screw #8x
Pan Head – Black
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
1
/
2
5. Seal End to End Frame
Remove front shelf and shelf support bracket.
1
Apply a / in. bead of Silicone at the back of
2
the case, starting at the first slot. Continue
across the bottom and up the front as shown
below. Use field-supplied silicone in any gap
between front support bracket and end assembly.
Seal
Glass
Front
Re-install bumpers as described beginning on
Page 1-11.
Note: Optional end bumpers
are factory-installed only.
Medium Temperature
Apply Silicone
Sealant
Excel
1-17