I
1-18
NSTALLATION
FRONT GLASS ADJUSTMENT
The front glass panel may be adjusted from side
to side by following these steps:
1. Lift out return air grilles and shelf supports.
2. Loosen but do not remove nuts in retainer.
There are four nuts in each 4 ft section of glass.
3. Move glass panels horizontally as needed.
4. Tighten nuts enough to hold glass. Do not
over-tighten, which will crack or break glass.
5. Replace shelf supports and return air grilles.
CAUTION
!
Do not over-tighten nuts. Excess pressure
will cause glass to break.
P/N 0463880_E
Glass
Top Rail
Bumper
Bolt
Return Air Grille
(Remove)
Retainer
Nut
Shelf Support
.
.
WWW
HUSSMANN
COM