Table of Contents
Advertisement
4.00
P/N 3143042_B
101.5mm
36.75
4. Attach hose to tee. Insert opposite end
933.4mm
of drain hose at least 1 inch onto slot on
pump, located on top of the pump.
4
5. Place pan underneath interior back panel.
HONEYCOMB
5.91
150.142mm
GAP BETWEEN
FOAM PNL AND INTR PNL
7.41
188.242mm
7.25
184.1mm
6. Connect tubing to condensate pan, which is
to be located on top of the case. See Page 2-2
of this manual for location of top-mounted
condensate pan.
INSTALL INTERIOR BACK PANEL
The interior back panel is packed separately
with the case. The cutouts in the panel
provide access to the valves, the pump and
reservoir.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
20.25
TOP ELECTRICAL BOX
514.3mm
39.95
1014.73mm
PUMP COVER
36.88
936.841mm
PUMP
PUMP ENCLOSURE ASSEMBLY
43.60
1107.3mm
POWER IN
(FIELD SUPPLY)
RESERVOIR
6
Condensate Pan
(Installed on top of case)
EGPF Merchandisers
Insert Drain Tubing
at least 1" onto slot
on pump.
FRONT SIDE
TOP VIEW
FRONT SIDE
REAR SIDE
BOTTOM VIEW
Secure Pan Tubing
Condensate Pan
Tubing to Pump
1-9
Advertisement
Table of Contents
