Table of Contents
Advertisement
Move the drain hose from
3
the from the plastic clasp
and clasps on the side of
the transit braces.
Remove the 12 transit brace
4
screws from the left and
right sides, and near the
centre of both the top and
bottom braces (refer to C).
Remove the braces (refer
5
to D) and retain these and
the screws for future use.
Remove (pull out) the two
6
transit rods located below the
two lower transit bolt holes
(refer to E).
Remove the yellow safety clip
7
from the power cord.
Cover the transit bolt holes with
8
the plastic plugs (provided). Push
to clip into place (refer to F).
6
INSTALLATION INSTRUCTIONS
Removing the drain hose
C
Removing the transit brace screws
Removing the transit rods
Covering bolt holes with plastic plugs
D
Removing the braces
E
F
Advertisement
Table of Contents
