Fisher & Paykel WH1260P Installation Manual/User Manual page 40

Front loading clothes washer
Table of Contents

Advertisement

Solving wash problems
PROBLEM
Dye transfer.
Black or grey
marks on clothes.
Tangling.
Contact a Fisher & Paykel trained and supported service technician if a problem persists.
38
TROUBLESHOOTING
POSSIBLE CAUSES
Coloured items not washed
separately from white/light
coloured items.
New or non-colourfast items
not washed separately.
Wet items have been left
sitting for too long.
Wash temperature.
Correct amount of
detergent.
Washer needs to be
cleaned.
Items not sorted correctly.
Washer loaded incorrectly.
Incorrect cycle for load type
selected.
Washer overloaded in terms
of its capacity or the cycle
selected.
Delicate items.
WHAT TO DO
Remember to separate whites and
colours.
Wash non-colourfast items separately
and select 'Cold' wash temperature.
Remove items from washer as soon
as the cycle is finished, or if items are
not to be removed from the washer
immediately select 'Wrinkle Free'.
Consider the wash temperature
you select for your coloured items.
Lower the temperature if you are
concerned.
Ensure the correct dose of
detergent is used for the load size
and soil level (refer to page 21).
Empty the machine and complete a
'Drum Clean' cycle (refer to page 28).
Separate larger items from smaller
items.
Load items loosely and individually
into the washer (ie not folded).
Use the 'Easy Iron' cycle to wash
shirts.
Try washing average to smaller load
sizes.
Wash pantyhose, bras and any other
delicate items prone to tangling in a
mesh laundry bag.

Advertisement

Table of Contents
loading

Table of Contents