Fisher & Paykel WH1260P Installation Manual/User Manual page 28

Front loading clothes washer
Table of Contents

Advertisement

Add a Garment
The 'Add a Garment' option enables you to add or remove items during the wash stage
of the cycle, under certain conditions. Once the 'Add a Garment' button is touched, the
button and time to go will flash. Wait until you hear the door unlock. Open the door
and add or remove items. Close the door and touch
a Garment' button will only operate during the wash part of the cycle and when the
temperature selected is lower than 60°C. 'Add a Garment' can still be used if the water
level is above the bottom of the door, as your washer will drain the water to a lower
level so the door can be opened.
Keylock
This option enables you to deactivate the buttons on the display panel, except for the
'Power' and 'Keylock' buttons. This prevents accidental button presses.
To turn Keylock mode ON or OFF when the washer is powered on:
Touch and hold the
Note: when activated, the light above the
If Keylock mode is activated and the machine is powered off:
To turn your washer on, press the 'POWER' button, then touch and hold the
for two seconds. Select your wash cycle, options and then touch
To turn the washer off at anytime when keylock is activated simply press the 'POWER'
button.
Delay Start
The 'Delay Start' option enables you to delay the start of the wash cycle from between
5 minutes and 12 hours. Times you can select are 5 min, 15 min, 30 min, 1 hour, then hourly
up to 12 hours. This can be useful to time your washing to finish when you arrive home
from work, or to start once you have finished in the shower. Some stain removers also
require you to spray them on then leave for several minutes, before washing. Your washer
will wait for the selected time then start the cycle without any other inputs from you.
To programme a 'Delay Start' time, simply touch the 'More'
delay time and 'Less'
to confirm your selection and start the countdown. Once started, the time will count
down on the display screen in 1 minute increments, the 'Delay Start' light will flash and
the
light will stop flashing and be on constantly.
Note: if you hold the 'More'
after every half second (more convenient than touching the button repetitively).
To remove a 'Delay Start' time once it is counting down, simply touch
'Less'
button to decrease the time to zero. Touch
Note: we suggest that you avoid using 'Delay Start' for damp, non-colourfast items as
this may cause dye run to occur.
26
WASH CYCLE OPTIONS
button for 2 seconds.
button to decrease the time or turn 'Delay Start' off. Touch
button down, the time displayed on the screen will increase
to restart the cycle. The 'Add
button is illuminated.
button to increase the
to start the cycle immediately.
button
to start the cycle.
, then touch the

Advertisement

Table of Contents
loading

Table of Contents