HOMCOM A90-278 Assembly & Instruction Manual page 39

EXERCISE NOTES
SPECIFICATIONS:
DISTANCE(DIST)............ 0.00~99.99ML
CALORIES(CAL)............ 0.0~999.9KCAL
ODOMETER(ODO)......... 0-999.9ML
PULSE(PUL).................. 40~240BPM
SPEED(SPD).................. 0.0~99.9ML/H
TIME..............................00:00~99:59
KEY FUNCTIONS:
RESET: Reset the value to zero by pressing the key.
MODE: This key lets you to select a particular function you want.
SET: The key allow you to choose a target value for DISTANCE,CALORIE,TIME you want.
OPERATION PROCEDURES:
1.AUTO ON/OFF
The system turns on when any key is pressed or when it sensors an input from the speed
sensor. The system turns off automatically when the speed has no signal input or no key is
pressed for approximately 4 minutes.
2.RESET
The unit can be reset by either changing batteries or pressing the RESET key for 4 sec-
onds.
3.MODE
To choose the SCAN function,press MODE key until the pointer advance to the SCAN and
begin blinking.To choose other functions,press MODE key until the pointer advance to the
function you want and stop blinking.
4.SET
Press MODE key until the pointer advance to DISTANCE,CALORIE,or TIME function and
stop blinking.Then press SET key to choose a target vaule you want.
BATTERY
This monitor uses two 1.5V AA batteries. If improper display on monitor, Please reinstall
the batteries to have a good result.
39