Advertisement
Available languages
Available languages
STEP 3
While a second person holds the
Upright (2) near the Frame (1),
connect the Upright wire (49) to the
Reed switch wire (7).
Next, connect the Resistance cable
(20) to the Lower resistance cable
(21) in the following way:
See drawing A. Pull upward on the
metal bracket (A) on the Lower
resistance cable (21), and insert the
tip of the resistance cable (20) into
the wire clip inside the metal brack-
et.
See drawing B. Firmly pull the resis-
tance cable (20) upward and slide it
into top of the metal bracket (1).
See drawing C. Using pliers,
squeeze the prongs on the upper
end of the metal bracket (A) togeth-
er.
30
Advertisement
