Installing The Rack-Mounted Device - Siemens SIPROCESS GA700 Operating Instructions Manual

6.3

Installing the rack-mounted device

Dimension drawing
The following figure shows the dimensions of the rack-mounted device and the distance of the
fastening holes at the mounting brackets. The dimensions are specified in millimeters.
Figure 6-1
Procedure
1. Place the rack unit in the control cabinet or the enclosure.
2. Fasten the rack-mounted device in the control cabinet or enclosure with four screws at its
mounting brackets.
The dimensions for the drill holes are specified in the dimension drawing.
Note
As an option, you can place the rack-mounted device on a guide bracket or floor panel in a rack
or cabinet.
Rack-mounted device
Operating Instructions, A5E31874006-12
Dimension drawing
6.3 Installing the rack-mounted device
Installing
53