Table of Contents
Advertisement
enaadvanced : this user has normal full control access of the
system
The default password for all levels = ena123
7.2.
Ethernet Port Connection
The energy manager contains static sensitive components that require
careful handling and proper precautions to be taken – an electrostatic
discharge protection device must be worn.
Figure 16: Energy Manager Ethernet Port
1.
Connect the communicating device to the J305 Ethernet port inside the energy manager.
2.
Open an internet browser such as Edge, Chrome, Firefox or similar on the device.
3.
Enter the Ethernet default IP address into the internet browser.
N
: the energy manager IP address can be located from the front panel LCD menu under:
ote
Settings>Networking>Ethernet.
4.
The energy manager log in page appears.
5.
Enter the username and password. See
7.3.
USB Connection
Figure 17: 1U EM4x-01 Front Panel micro-USB
Newmar • 1580 Sunflower Ave, Suite 100, Costa Mesa, CA 92626
Phone: 714-751-0488 • E-mail: techservice@Newmarpower.com
7.1 Access
Levels.
12
Ethernet Port
Advertisement
Table of Contents
