Table of Contents
Advertisement
Table 2: IO Board 1 Relay Alarm Assignments
Relay Label
Relay
(In NewMar Config.)
Output
Relay 1
CPU Fail
Relay 2
Non-Critical Alarms
Relay 3
Critical alarms
Relay 4
Spare
Relay 5
Spare
Relay 6
Spare
Buzzer
7.7.
EM4x Main PCB Digital Input Alarm Mappings
General purpose inputs allow the Commander II & II+ system to monitor any external
equipment that includes relay or auxiliary outputs. The GPIP inputs are activated by
connecting the system positive (common) to the input terminal (configuration setup in the
EM4x can allow activation by connecting to system live).
General purpose inputs can also be configured as analogue inputs for purposes such as
battery midpoint monitoring and voltage monitoring.
These inputs may be assigned to contribute to alarm states within the monitor. The state
mapping is defined in the configuration file. Alarm mapping should be completed using the
EM4x software. Please refer to the EM4x manual for detailed information.
The inputs are normally activated by connecting system positive (usually system common) to
the input.
Newmar • 1580 Sunflower Ave, Suite 100, Costa Mesa, CA 92626
Phone: 714-751-0488 • E-mail: techservice@Newmarpower.com
Relay Outputs 1 - 6
Alarms Mapped to Relay/Output
(All multiple states "OR-ed")
Orange LED
Red LED
Red LED
15
Advertisement
Table of Contents
