Table of Contents
Advertisement
The system MUST be
configured to the correct
battery type.
EM4x Web UI page
Battery>Battery Settings
Modular Smart Lithium Battery Selection
If the system is connected via Modbus RTU to a battery BMS check the correct
specific battery is selected from the Product drop down list and mapped to the
correct address. EM4x Web UI page: IO Configuration>Modbus Master>Device Map
Check/Set Float Voltage
Consult the battery manufacturer's data for the proper setting. Note that the float
voltage directly impacts the state of health of batteries after multiple cycles. The
consequences of the float voltage setting must be understood.
The Float voltage is for 25°C reference temperature in NewMar systems.
EM4x Web UI page: Control
Example:
Site Setting:
A
1 – AC I
PPENDIX
NPUT
Fig 6.0 Illustrates the surge protection installation principles.
Newmar • 1580 Sunflower Ave, Suite 100, Costa Mesa, CA 92626
Phone: 714-751-0488 • E-mail: techservice@Newmarpower.com
T
P
RANSIENT
ROTECTION
25
/
/
Advertisement
Table of Contents
