Section 8-Accessories; Jasmine Scale Jls5; Removing The Swivel Bar/Cradle Attachment - Invacare JASMINE Owner's Manual

SECTION 8—ACCESSORIES

Jasmine Scale JLS5

The Jasmine Scale is a compact precision scale system designed specifically for the Invacare Patient Lift System.

Removing the Swivel Bar/Cradle Attachment

NOTE: For this procedure, refer to FIGURE 8.1.
1. Remove the side rubber caps.
NOTE: Support the swivel bar or cradle attachment from underneath while removing the attaching hardware.
2. Remove the socket head screw, washer, bushings, top rubber cap, nylon spacers, washer and nut that attach the swivel
bar or cradle attachment to the boom.
NOTE: When the attaching hardware is removed, the pin, washer and o‐ring will become loose.
NOTE: Save the socket screw, small steel washer and locknut to secure the Jasmine Scale to the boom.
NOTE: Save the remaining hardware for future use of the swivel bar or cradle attachment without the scale.
Socket Head Screw
Part No 1150704
Bushing
Washer
Side Rubber Cap Nylon Spacer
O-ring
Washer
FIGURE 8.1 Removing the Swivel Bar/Cradle Attachment
Top Rubber Cap
Side Rubber Cap
Washer
Nut
Bushing
Nylon Spacer
Swivel Bar
Pin
Bottom Rubber Cap
27
SECTION 8—ACCESSORIES
Optional Cradle
Attachment
Jasmine™ Patient Lift