Table of Contents
Advertisement
LED Indicators
crash, we ask that you send this file when you contact TAC for assistance. To view the
CRSHDUMP.TXT file, see Administration | File Management | View, and click on View Saved Log
Crash Dump File .
Configuration Files
The VPN 3002 saves the current boot configuration file (CONFIG) and its predecessor (CONFIG.BAK)
as files in flash memory. These files may be useful for troubleshooting. See Administration | File
Management for information on managing files in flash memory.
LED Indicators
LED indicators on the VPN 3002 are normally green or flashing amber. LEDs that are solid amber or off
may indicate an error condition.
Contact Cisco TAC if any LED indicates an error condition.
VPN 3002 Front LEDs
The LEDs on the front of the VPN 3002 are:
LED
PWR
SYS
VPN
VPN 3002 Hardware Client Reference
A-2
Status
Green
Off
Flashing amber
Solid amber
Flashing green
Green
Off
Amber
Green
Appendix A
Explanation
Unit is on and has power.
Unit is powered off.
Unit is performing diagnostics.
Unit has failed diagnostics.
Unit is negotiating DHCP or PPPoE.
Unit is operational.
No VPN tunnel exists.
Tunnel has failed.
Tunnel is established.
Troubleshooting and System Errors
OL-1893-01
Advertisement
Table of Contents
