When The Network Expansion Kit Is Installed - Sharp AR-7024 Operation Manual

SETUP
WHEN THE NETWORK EXPANSION KIT IS
INSTALLED
This describes how to install the software for a machine which is equipped with a network expansion kit.
• Installing the printer driver for a machine connected to the network: this page
• Installing the printer driver for a machine connected by USB cable: page 16
• Installing the PS printer driver or PPD printer driver: page 18
• Installing the Print Status Monitor: page 19
• Installing the scanner driver: page 20
If installing a PCL driver, install it while referring to the procedure given on this page.
Note
(The machine must be equipped with the network expansion kit and the printer expansion kit.)
Installing the printer driver
When the machine is connected to a network
1
Insert the LAN cable into the LAN
connector on the machine.
Use a network cable that is shielded.
2
Insert the CD-ROM into your CD-ROM
drive.
3
Click the "File Explorer" icon (
the tool bar, then click "This PC" and
double-click the "CD-ROM" icon (
• In Windows 8.1/Server 2012, double-click the
"CD-ROM" icon.
* If no icon is displayed in Windows Server
2012, right-click in the Start screen (or swipe
upward from the bottom edge), then select
the App Bar → "All apps" → "Computer" and
then double-click "CD-ROM".
* If no icon is displayed in Windows 8.1, click
the ( ) icon in the Start screen and then
double-click "CD-ROM" icon.
• In Windows Server 2012 R2, right-click the
"Start" button, then click the "File Explorer"
icon, then click "This PC" and double-click the
"CD-ROM" icon.
14
4
Double-click the "Setup" icon (
Note
5
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the
software license, and then click the
"Yes" button.
6
Read the message in the "Welcome"
window and then click the "Next"
button.
) on
) .
If a message screen appears asking you for
confirmation, click "Yes" or "Allow".
).