Scanning Using The Keys On The Machine; Using Button Manager - Sharp AR-7024 Operation Manual

SCANNING USING THE KEYS ON
THE MACHINE

USING BUTTON MANAGER

When scanning is performed by this method, the application that has been set in BUTTON MANAGER will
automatically start and the scanned image will be pasted into the application. For the steps to allocate applications
using the BUTTON MANAGER or other settings, see
• If the machine is in copy mode, press the [SCAN] key (
Note
set copy settings.
• When the network expansion kit is installed or the machine is equipped standard with the network function, you
can save scanned data in a USB memory device (Scan to USB memory), save scanned data in a mobile device
using Sharpdesk Mobile (Scan to Sharpdesk Mobile), or send scanned data over the network (Scan to E-mail,
Scan to FTP, Scan to Desktop). For details, see
DEVICE, OR TO A MOBILE DEVICE"
Scanning from the operation panel of the machine
1
Press the [SCAN] key (
2
Place the original(s) that you wish to
scan on the document glass/RSPF.
[When scanning from the document glass]
mark
Original size scale
[When scanning from the RSPF]
(p.82).
).
When the SCAN indicator
lights up, the machine
enters scanner mode.
Place the original face
down on the document
glass. Align the corner of
the original with the tip of
the arrow mark ( ) on
the document glass scale.
Set the original(s) face up
in the document feeder
tray.
"BUTTON MANAGER SETTINGS"
) to switch to scanner mode and clear the previously
"SENDING OVER A NETWORK, TO A USB MEMORY
3
Press the [SCAN MENU] key to begin
scanning.
• To return to copy mode from scanner mode,
Note
press the [SCAN] key (
ALL] key (
• For limitations on copying and printing in
scanner mode, and scanner mode while
copying or printing, see
COPY, PRINTER, AND SCANNER
MODES"
(p.81).
Scanning will start and the
scanned data will be
transferred to the
application.
The target application can
be selected by the [SCAN
MENU] key.
For the default application
allocated to each key, see
"BUTTON MANAGER
SETTINGS" (p.81).
The number of copies
display will show the
number of the [SCAN
MENU] key that you
pressed, and the number
will light and the DATA
indicator will be blinking.
) or [CLEAR
).
"OPERATION IN
(p.43).
5
79