Operation In Copy, Printer, And Scanner Modes - Sharp AR-7024 Operation Manual

1
Perform steps 1 to 5 of
TRAY'S PAPER SIZE SETTING"
and select the tray whose paper type
you want to change.
2
Press the [Copy ratio] key (
The light of the tray selected for the paper type
setting will blink, and the ratio display will change
as follows.
Ratio display
Off
to
* For the difference between Heavy 1 and Heavy 2,
refer to "PAPER" (p.38).
Only plain paper, recycled paper and thin
Note
paper can be set for paper trays 1 to 4.
OPERATION IN COPY, PRINTER,
AND SCANNER MODES
Some operations cannot be performed simultaneously when the machine is being used in printer mode, copy mode,
or scanner mode.
Modes
Copy key input
Copy
During copying
Printer During printing
During scan preview/
Scanner
during scanning
"CHANGING A
(p.41),
, ).
Paper type
Standard paper
Thin paper
Heavy paper 1*
Heavy paper 2*
Envelopes
For the ratio display
and envelope types,
refer to "Envelope
display".
Labels
Transparency film
Copying
Yes
Yes
No
BEFORE USING THE MACHINE
3
After pressing the [START] key (
press the [PAPER] key to exit the
settings.
Envelope display
Ratio display
Scanning from a
Printing
computer
Yes Yes
No No
Yes
Yes
),
To change the paper size
setting of another tray,
repeat steps 2 to 5 after
pressing the [START]
key ( ).
Envelope types
Monarch
Com-10
DL
Envelope Chou 3
YOKEI-2
Kaku-2
kaku-3
YOKEI-4
Scanning from
the machine
No
No
Yes
43
2