Installing The Software - Sharp AR-7024 Operation Manual

INSTALLING THE SOFTWARE

• When the network expansion kit and the printer expansion kit is installed : page 14
• The screen images in this manual are mainly for Windows 10. With other versions of Windows, some screen
Note
images may be different from those in this manual.
• If an error message appears, follow the instructions on the screen to solve the problem. After the problem is
solved, the installation procedure will continue. Depending on the problem, you may have to click the "Cancel"
button to exit the installer. In this case, reinstall the software from the beginning after solving the problem.
1
The USB cable must not be connected
to the machine. Make sure that the
cable is not connected before
proceeding.
If the cable is connected, a Plug and Play window
will appear. If this happens, click the "Cancel" button
to close the window and disconnect the cable.
The cable will be connected in step 12.
Note
2
Insert the CD-ROM into your CD-ROM
drive.
3
Click the "File Explorer" icon (
the tool bar, then click "This PC" and
double-click the "CD-ROM" icon (
• In Windows 8.1/Server 2012, double-click the
"CD-ROM" icon.
* If no icon is displayed in Windows Server
2012, right-click in the Start screen (or swipe
upward from the bottom edge), then select
the App Bar → "All apps" → "Computer" and
then double-click "CD-ROM".
* If no icon is displayed in Windows 8.1, click
the ( ) icon in the Start screen and then
double-click "CD-ROM" icon.
• In Windows Server 2012 R2, right-click the
"Start" button, then click the "File Explorer"
icon, then click "This PC" and double-click the
"CD-ROM" icon.
4
Double-click the "Setup" icon (
• If a message screen appears asking you for
Caution
confirmation, click "Yes" or "Allow".
10
5
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the
software license, and then click the
"Yes" button.
Note
6
Read the message in the "Welcome"
window and then click the "Next"
) on
button.
) .
7
To connect the machine and a computer
directly via a USB cable, normally click
the "Standard" button and go to step 11.
When you click the "Custom" button, go
to the next step.
To automatically install the MFP driver
(printer/scanner driver) and Button Manager,
select "Standard".
8
Click the "MFP Driver" button.
).
Click the "Display Readme" button to show
information on packages that are selected.
You can show the "SOFTWARE LICENSE" in
a different language by selecting the desired
language from the language menu. To install
the software in the selected language,
continue the installation with that language
selected.