Outline Of Button Manager - Sharp AR-7024 Operation Manual

SCANNER FUNCTIONS

OUTLINE OF BUTTON MANAGER

BUTTON MANAGER is a software utility that allows you to use the scanner function at the machine. BUTTON
MANAGER allows you to configure six sets of scanning settings as a scan menu on the machine.
To view Help for a setting, click the
To begin scanning using the machine's operation panel, settings must be established in the Control Panel after
BUTTON MANAGER is installed. For information on installing BUTTON MANAGER and establishing the Control
Panel settings, see "SETTING UP BUTTON MANAGER"
operation panel, see "SCANNING USING THE KEYS ON THE MACHINE"
You can use BUTTON MANAGER to select and change the functions of the six scan menus. Refer to
MANAGER SETTINGS"
Tab
1
Click to set scan menu options. Each tab contains
scan settings for the scan menu.
"Application Selection" area
2
Select the start-up application here.
"Show TWAIN setting screen when scanning"
3
Checkbox
You can select whether or not the TWAIN screen is
shown. When the checkbox is selected, the TWAIN
screen appears when scanning is executed to let
you adjust the scanning conditions.
4
"Scan Setup" area
Set the scan conditions.
Some applications may limit your choice of
Note
settings.
80
button in the upper right-hand corner of the window and then click the setting.
(p.81).
1
2
3
4
(p.24). For information on scanning using the machine's
(p.79).
5 6 7
"OK" button
5
Click to save your settings and exit the dialog box.
"Cancel" button
6
Click this button to exit the dialog box without
making any changes to the settings.
"Apply" button
7
Click to save your settings without closing the
dialog box.
"Help" button
8
Click this button to display the help file for BUTTON
MANAGER.
"BUTTON
8