Loading Paper; Paper - Sharp AR-7024 Operation Manual

LOADING PAPER

The paper display blinks, and the display of the paper tray that ran out of paper blinks. or when the selected paper
tray is not installed or is improperly installed.

PAPER

For best results, use only SHARP recommended paper.
Paper tray type
Paper tray Standard paper
Recycled paper
Thin paper*
4
Bypass tray* Standard paper
Recycled paper
Thin paper*
Transparency film
Labels
Heavy paper 1
Heavy paper 2
Envelopes
1
* When making a large number of copies or prints using more than 90 g/m
paper output tray when about 100 pages have been printed. The output may not stack correctly if more than 100 pages are
allowed to accumulate.
2
* The number of sheets of the paper which can be set changes with the weight of a paper.
3
* Thin paper cannot be used for two-sided copying.
4
* Bypass tray is not supported for two-sided copying.
Special papers
Follow these guidelines when using special papers.
Use SHARP recommended transparency film and label sheets. Using other than SHARP recommended paper
may result in misfeeds or smudges on the output. Feed each sheet one at a time using the bypass tray (do not
attempt continuous copying or printing).
There are many varieties of special paper available on the market, and some cannot be used with this machine.
Before using special paper, contact your authorised service representative.
Before using other than SHARP recommended paper, make a test copy to see if the paper is suitable.
38
Paper type
A5R
B5R
B5
3
A4R
A4
B4
A3
(5-1/2" x 8-1/2"R (Invoice))
(8-1/2" x 11"R (Letter R))
(8-1/2" x 11" (Letter))
(8-1/2" x 13" (Foolscap))
(8-1/2" x 13-1/2")
(8-1/2" x 13-2/5")
(8-1/2" x 14" (Legal))
(11" x 17" (Ledger))
A6R to A3
(5-1/2" x 8-1/2" (Invoice)
3
to 11" x 17" (Ledger))
A6R to A4
(5-1/2" x 8-1/2" (Invoice)
to 8-1/2" x 11" (Letter))
International DL
(110 mm x 220 mm)
Monarch
(3-7/8" x 7-1/2")
Commercial 10
(4-1/8" x 9-1/2")
Envelope Chou 3
YOKEI-2
Kaku-2
Kaku-3
YOKEI-4
Size
55 g/m
(13 lbs. bond to 28
lbs. bond)
55 g/m
(13 lbs. bond to 28
lbs. bond)
-
106 g/m
(28 lbs. bond to 32
lbs. bond)
129 g/m
(32 lbs. bond to 110
lbs. bond)
-
2
(24 lbs. bond) paper, remove the output from the
Weight Capacity
2 2 *1
to 105 g/m 250 sheets
(Load paper lower
than the line on the
tray)
500 sheets
(Load paper lower
than the line on the
tray)
2 2
to 105 g/m 100 sheets
Load one sheet of
paper each time on
the bypass tray.
2 2
to 128 g/m You can load multiple
sheets of paper on
the bypass tray.
2 2
to 200 g/m Load one sheet of
paper each time on
the bypass tray.
10 sheets
*2
*2
*2