Table of Contents
Advertisement
To remove an AC power supply:
1. Remove the AC power cable from the power supply's connector.
2. Grasping the handle of the failed power supply, use the Release Latch to release the locking
mechanism.
Figure 1 Replacing a failed power supply
Label
1
2
3. Insert the new power supply. Slide it all the way in until the locking mechanism clicks into place.
4. Connect the AC power cable to the new power supply's connector
Replacing a Fan Tray
The Aruba 8360 switch is equipped with three field-replaceable, hot-swappable fan trays, while the Aruba
8360-48Y6C switch is equipped with five. The switch can tolerate the failure of a single fan tray while
maintaining a safe operating temperature. To maintain system redundancy, a failed fan tray should be
replaced as soon as possible. The Fan LED will FLASH amber, indicating a fan tray has failed.
Description
Release latch
Power supply pull handle
Replacing Components
|
50
Advertisement
Table of Contents
Troubleshooting
