Connect The Switch To A Power Source - Aruba 8360 Series Installation And Getting Started Manual

SKU Description
48Y6C v2
Pwr2Prt5F2AC
Bdl
JL719C
Aruba 8360-
48Y6C v2 Switch
EMI plugs for 50G XCVR support on 8360 SKUs in table 2 above are required in the United States and Canada
only.
Figure 2 EMI plug-supported Switches
Label
1
2
3

Connect the Switch to a Power Source

1. If two power supplies are not already installed in the switch, see
2. Plug the included power cords into the power supply's power connector and into a nearby AC power
source.
3. Check the LEDs. See
Aruba 8360 Switch Series | Installation and Getting Started Guide
EMI plug
22
Description
JL717C/JL700C/JL701C Aruba 8360-32Y4C v2
JL718C/JL702C/JL703C Aruba 8360-16Y2C v2
JL719C/JL704C/JL705C Aruba 8360-48Y6C v2
Chassis and Port LEDs on the front of the switch on page
Remarks
50G Transceiver: All even port fr 6 to 48
EMI plug: All odd port fr 5 to 47
50G Transceiver: All even port fr 6 to 48
Install Power Supplies on page 35.
13.
44