Power Cords - Aruba 8360 Series Installation And Getting Started Manual

Switch model
Aruba 8360-16Y2C
Pwr2Prt3F2PS Bdl (JL703A)
Aruba 8360-16Y2C v2 BF 3F
2AC Bdl (JL703C)
Aruba 8360-48XT4C
Pwr2Prt3F2PS Bdl (JL707A)
Aruba 8360-48XT4C v2 BF 3F
2AC Bdl (JL707C)
Aruba 8360-12C Pwr2Prt3F2PS
Bdl (JL709A)
Aruba 8360-12C v2 BF 3F 2AC
Bdl (JL709C)
Aruba 8360-24XF2C
Pwr2Prt3F2PS Bdl (JL711A)
Aruba 8360-24XF2C v2 BF 3F
2AC Bdl (JL711C)
Aruba 8360-48Y6C v2 FB 5F
2PS Bdl (JL704C)
Aruba 8360-48Y6C v2 BF 5F
2PS Bdl (JL705C)
Power supplies automatically adjusts to any voltage between 100-127 volts and 200-240 volts.

Power Cords

Aruba includes the power cord intended for use with your Aruba switch and power supply. Different
countries/regions may require different power cords. For a list of the power cords that apply to your switch,
see Included Parts.
Only Aruba-approved power cords may be used with Aruba devices. To access power cord information for your
switch, see Included Parts. Lost or damaged power cords must be replaced only with Aruba-approved power cords.
If your installation requires a different power cord than the one supplied with the switch and/or power supply, be
sure that the cord is adequately sized for the current requirements of the switch. In addition, be sure to use a
power cord displaying the mark of the safety agency that defines the regulations for power cords in your
country/region. The mark is your assurance that the power cord can be used safely with the switch and power
supply.
Maximum cur-
Power Supplies
rent
Aruba X391 850 10A for 110-
Prt2Pwr AC PSU 127VAC & 5A for
(JL601A) 200-240VAC
Aruba X391 850W
Pwr2Prt AC PSU
(JL713A)
Frequency
AC Voltage
range
47-63 Hz
Specifications | 61