Pkm WA6-ES1510 Instruction Manual page 94

b. How to lower the appliance: turn the
adjustable feet to the right (s. fig. on the
right).
NOTICE! After you have levelled the appliance properly, always
tighten the lock nuts again.
2.5 Connection of the water inlet hose
NOTICE! Do not use tools to fix the water inlet hose. Otherwise, you may
damage the water inlet valve. RISK OF DAMAGE!
➢ Do not use a water connection the water of which is warmer than 50 °C.
➢ Required water pressure (flow pressure): 100 kPa - 1000 kPa (1 - 10 bar). If the
water pressure is higher than that specified here, you must install a pressure
reducer.
➢ Use brand-new hoses and connector kids only.
➢ The appliance must not be connected to the mixer tap of an unpressurised water
heater.
➢ Check the connections for leaks by turning the tap on completely.
➢ If the water inlet hose is too short, replace it with a suitable length of a pressure-
resistant water inlet hose (1000 kPa/min).
➢ Check the water inlet hose regularly for brittleness and cracks and replace it if
necessary.
1. Ensure that the rubber washer
connector (both ends
Depending on model.
27
Depending on model.
28
C
OLD WATER SUPPLY
H
OW TO CONNECT THE WATER INLET HOSE
28 / s. fig. on the right).
27 is in the valve
~ ~
94