Pkm WA6-ES1510 Instruction Manual page 127

H
1. The appliance must be in
2. To set an additional rinsing cycle for a washing programme, press the
« W + » -
ASH BUTTON
3. The operational status indicator of the « W
also chapter 3.2.2 C
4. The function is activated.
If the selected washing programme cannot be combined with the desired
functions, these functions cannot be selected or the corresponding indicators
flash for 3 seconds or the functions will be cancelled and the indicators switches
off automatically (depending on model).
H
OW TO DEACTIVATE THE
1. The appliance must be in
2. To set an additional rinsing cycle for a washing programme, press the
« W + » -
ASH BUTTON
3. The operational status indicator of the « W
also chapter 3.2.2 C
4. The function is deactivated.
F
UNCTION
❖ You can set a delayed programme start.
❖ Set the washing programme and the desired additional function first and then
activate the « D
You can choose a delay period from 1 hours to 24 hours.
Do not use liquid detergent when you use the « D
liquid detergent container (washing ball, etc.) could tip over in the washing drum
and the liquid detergent could therefore come into contact with the dry textiles.
If the washing programme starts later and the liquid detergent is in contact with
the dry textiles for a longer period of time, it may cause stains on the textiles that
are difficult to remove.
The « D » -
ELAY
chapter 4.3 T
HE ADDITIONAL FUNCTIONS
OW TO ACTIVATE THE
STANDBY MODE
(5) once.
ONTROL PANEL
STANDBY MODE
(5) once again.
ONTROL PANEL
« D » =
ELAY
» -
ELAY FUNCTION
may not be available for all programmes (see also
FUNCTION
« W + » -
ASH
.
+ » -
ASH
:
INDICATORS OF THE DISPLAY
« R + » -
INSE
.
+ » -
ASH
:
INDICATORS OF THE DISPLAY
DELAYED PROGRAMME START
using the corresponding button.
).
~ ~
127
FUNCTION
(D) goes on (see
FUNCTION
).
FUNCTION
(D) goes off (see
FUNCTION
).
» -
ELAY FUNCTION
. The