Pkm WA6-ES1510 Instruction Manual page 145

5. Reinstall the water inlet filter in the hose end. Ensure that the seal (rubber washer)
is properly inserted in the valve connection.
6. Reconnect the water inlet hose to the tap.
7. Remove the water inlet hose (A) from the water inlet valve (B / water inlet valve
on the back of the appliance / s. fig. below).
8. Remove the water inlet filter (sieve filter / D) from the water valve (B) using a
universal pliers (C / s. fig. below).
9. Clean the water inlet filter (sieve filter / D) using some water and a toothbrush
(E / s. fig. below.
A
B
C
D
E
10. Reinstall the water inlet filter (sieve filter / D) properly (s. fig. below).
11. Reconnect the water inlet hose (A) to the appliance again (s. fig, below).
Fig. similar: fig. serve as an example only.
W
W
U
WATER INLET
~
145
ATER INLET HOSE
ATER INLET VALVE
NIVERSAL PLIERS
F (sieve filter)
ILTER
T
OOTHBRUSH
~