Pkm WA6-ES1510 Instruction Manual page 149

Table of Contents

Advertisement

Available languages

Available languages

POSSIBLE CAUSE
1. Heater defective.
1. Door is not closed properly.
2. No water supply.
3. S
/ P
TART
AUSE
4. O
/ O
button is not pressed.
N
FF
1. No energy supply.
2. Circuit board damaged.
3. Wiring harness damaged.
S
1. Accumulated, damp detergent.
1. Heavily-contaminated laundry.
2. Wrong amount of detergent.
1. The shipping bolts are still in the
appliance.
2. The appliance is not installed and /
or adjusted properly.
3. Foreign objects are in the appliance. 3. Remove any foreign objects.
4. Load is too low.
5. The laundry has accumulated at one
side of the drum.
6. Laundry that cannot be spaced is in
the drum.
M
ALFUNCTION
(
)
S
F
AULTY HEATING
P
ROGRAMMES DO NOT START
button is pressed.
I
/ D
NDICATORS
OME DETERGENT LEFT IN THE CONTAINER
U
NSATISFACTORY WASHING RESULTS
A
BNORMAL NOISE
.
1. The appliance can wash but not heat.
Please contact your aftersales service
immediately.
1. Close the door properly.
2. Check the water supply.
3. Check your settings.
4. Press the O
ISPLAY DO NOT WORK
1. Check the energy supply.
2. Please
service.
3. Check the wiring harness (please
contact your aftersales service if
necessary).
1. Clean the container.
➢ Use liquid detergents.
➢ Use detergents suitable for washers
only.
1. Select a suitable programme.
2. Choose the proper amount of
detergent (look at the information on
the packaging of your detergent).
/ S
EVERE VIBRATIONS
1. Remove the shipping bolts.
2. Install and / or adjust the appliance
properly.
4. Load the appliance properly.
5. Space the laundry.
6. Remove the pieces which cannot be
spaced.
~
~
149
(
)
MEASURE
S
.
/ O
button.
N
FF
.
contact
your
.
.
aftersales

Advertisement

Table of Contents
loading

Table of Contents