Pkm WA6-ES1510 Instruction Manual page 125

If spin speed «
cancelled. Before the programme ends, the appliance drains only the water.
In some washing programmes the settable spin speeds are limited (see also
chapter 4.2 T
).
FUNCTIONS
The « S » -
PIN
chapter 4.3 T
HE ADDITIONAL FUNCTIONS
1. The appliance must be in
2. To set the spin speed of a washing programme individually, press the « S
(3) repeatedly until the desired spin speed is indicated on the display (B
BUTTON
/ see also chapter 3.2.2 C
If you do not want the washing machine to perform a final spinning cycle, press
the « S » -
PEED
final spinning cycle will not be performed.
If the selected washing programme cannot be combined with the desired
functions, these functions cannot be selected or the corresponding indicators
flash for 3 seconds or the functions will be cancelled and the indicators switches
off automatically (depending on model).
F
UNCTION
❖ For some washing programmes, the default rinsing cycles can be increased by an
additional rinsing cycle. The appliance performs an additional rinsing cycle at the
end of the default rinsing cycle(s) before starting the softening cycle. The running
time of the washing programme increases accordingly.
❖ This « R
+ » - function is suitable to ensure that the main detergent is rinsed
INSE
out of the textiles thoroughly.
❖ Each washing programme includes a default number of rinsing cycles (s. chapter
4.2 T
HE WASHING PROGRAMMES
The « R + » -
INSE
chapter 4.3 T
HE ADDITIONAL FUNCTIONS
0
= » has been selected, the final spin speed will be
HE WASHING PROGRAMMES
may not be available for all programmes (see also
FUNCTION
H
OW TO SET THE DESIRED SPIN SPEED
STANDBY MODE
ONTROL PANEL
repeatedly until the indicator «
BUTTON
« R + » = + 1
INSE
may not be available for all programmes (see also
FUNCTION
and chapter 4.3 T
).
.
:
INDICATORS OF THE DISPLAY
ADDITIONAL RINSING CYCLE
).
).
~ ~
125
HE ADDITIONAL
» -
PEED
).
» goes on. The