Pkm WA6-ES1510 Instruction Manual page 143

3. Remove the cover panel.
4. Place a container in front of the opening.
5. Open the drain pump filter (C), but do not remove it completely. Rotate the drain
pump filter (C) in anti-clockwise direction until the water begins to run (s. fig.
below).
6. Wait until the water has drained completely.
7. Unscrew the drain pump filter completely and remove it (s. fig. below).
C
8. Clean the drain pump filter carefully.
9. Depending on model, check that the pump rotor can move freely.
10. Insert the drain pump filter (C) and screw it in as far as possible in clockwise
direction (s. fig. below).
C
11. Check that the drain pump filter is installed properly.
12. Reinstall and / or close the cover panel properly.
Depending on model.
43
43
Fig. similar: fig. serve as an example only.
D
Fig. similar: fig. serve as an example only.
D
~
143
RAIN PUMP FILTER
RAIN PUMP FILTER
~