Pkm WA6-ES1510 Instruction Manual page 123

➢ After starting this programme, the appliance automatically determines the weight
of the laundry in the washing drum. Depending on this weight, the washing
temperature, the water consumption and the washing time are determined and
set automatically. A manual setting of these washing parameters is not possible.
1. The appliance must be in O
2. Load the drum.
3. Fill the detergent(s) into the relevant sections of the dispenser according to the
programme.
4. Open the tap.
5. Press and hold « S
6. The Smart -Programme starts.
P
LEASE NOTE
the « S / P
TART
4.4.2 Selection of the additional functions
F
OLLOWING ADDITIONAL FUNCTIONS CAN BE SELECTED
→ « T
FUNCTION EMP
→ « S
FUNCTION PIN
→ F « R
UNCTION INSE
→ F « W
UNCTION
→ « D
FUNCTION ELAY
→ « C
FUNCTION HILD SAFETY LOCK
1. Press the corresponding button(s)to select or to modify an additional function.
2. Press the corresponding button(s) once or repeatedly, until the indicator of the
desired function or combination
If the selected washing programme cannot be combined with the desired
functions, these functions cannot be selected or the corresponding indicators
flash for 3 seconds or the functions will be cancelled and the indicators switches
off automatically (depending on model).
Depending on model.
36
H
OW TO START THE
FF MODE
- P
MART ROGRAMME
: depending on the appliance model, you may also have to press
» -
AUSE BUTTON
. » = selection of the washing temperature
» = selection of the spin speed
+ » = + 1 additional rinsing cycle
+ » = main washing cycle: + 10 minutes
ASH
» = delayed programme start
36
S - P
MART ROGRAMME
or in
STANDBY MODE
» -
BUTTON
(8) to start the programme.
» = key lock (O / O
N
is displayed.
~ ~
123
.
(9) for 3 seconds.
:
)
FF