Pkm WA6-ES1510 Instruction Manual page 128

It is possible that the current run time of the selected washing programme will be
adjusted automatically so that it may vary from the washing time which is
indicated on the display.
H
OW TO ACTIVATE A DELAYED PROGRAMME START
1. Set the washing programme using the rotary knob. Set the desired additional
function(s) using the corresponding buttons.
2. The appliance is switched on and in
3. Press the « D
ELAY
- 24 h) is indicated on the display.
Each press of the « D
hour.
4. The programmable delay periods are from 1 hours (min.) to 24 hours (max.).
5. Press the « S
TART
6. The operational status indicator of the delayed programme start (E) goes on. The
countdown of the set delay period begins.
7. As soon as the countdown time has elapsed, the washing programme starts and
the information indicator displays the remaining washing time. The operational
status indicator of the delayed programme start (E) goes off.
If the selected washing programme cannot be combined with the desired
functions, these functions cannot be selected or the corresponding indicators
flash for 3 seconds or the functions will be cancelled and the indicators switches
off automatically (depending on model).
H
OW TO CANCEL THE DELAYED PROGRAMME START
To cancel the programmed delay period before pressing the « S
P » -
AUSE BUTTON
set another programme using the rotary knob.
If you wish to cancel the delayed programme start after pressing the « S
P » -
AUSE BUTTON
switch off the appliance using rotary knob (« O
Depending on model.
37
» - (7) repeatedly until the desired delay period (1 h
BUTTON
» -
ELAY BUTTON
/ P » -
AUSE BUTTON
, set the delay period to « 0 » using the « D
(but before the washing programme has started), you have to
~
.
STANDBY MODE
increases the delay period by one
(8) after you have set the delay period.
/ O
N FF
~
128
TART
» -
ELAY BUTTON
TART
») 37 .
/
or
/