Technical Informationfor Installing Technicians; Useful Recommendations; Qualification Of Installing Technicians; Use Of The Installation, Operating And Maintenance Manual - hajdu HP-TOWER HPT200 Installation, Operating And Maintenance Manual

Table of Contents

Advertisement

Available languages

Available languages

HPT 200 • HPT 200C
cated to electric or electronic devices, or returned to the distributor, provided that you
are about to buy a new product of the same type. It is the user's task to transport the
dismounted appliance to the appropriate waste disposal site. The proper and selective
collection of the dismounted appliance, and then, its eco-compatible recycling, han-
dling and disposal will contribute to the prevention of harmful effects on the environ-
ment and human health, and thus, promote the recycling of materials incorporated in
the product.
TECHNICAL INFORMATION
FOR INSTALLING TECHNICIANS

7. USEFUL RECOMMENDATIONS

7.1. Qualification of installing technicians

WARNING
A qualified technician must perform the installation and first start up of the appli-
ance, in line with the relevant national regulations in effect, and any other require-
ment set out by the local governments or public health institutions .
The heat pump hot water tank contains R134a cooling agent of the quantity required
for its operation. The cooling fluid does not damage the ozone layer of the atmos-
phere, it is not flammable or explosive, but only authorized personnel is allowed to
perform any maintenance or repair work on the cooling circuit using adequate equip-
ment.

7.2. Use of the Installation, Operating and Maintenance Manual

WARNING
Improper installation may cause injuries to people or animals, or cause damages in
objects. The manufacturer assumes no liability for these.
The person performing installation of the appliance must observe the instructions of
the manual. After finishing the installation, the person performing it must provide in-
formation and guidance to the user as to the operation of the water heater and the
proper execution of main operations.

7.3. Inspection of the heat pump water heater

When moving the appliance or opening its packaging, please, follow the instructions
laid down under Clauses 1.4, 1.5 and 1.6 of the chapter GENERAL INFORMATION
carefully.
During the removal of the packaging, please, check the integrity of the appliance and
that all necessary parts are located in the package.
82

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp-tower hpt200c

Table of Contents