Setting The Temperature; Available Energy Sources - hajdu HP-TOWER HPT200 Installation, Operating And Maintenance Manual

Table of Contents

Available languages

HPT 200 • HPT 200C

When the tank is filled, please, press the ON\OFF button. Then the Fill Water indicator

stops flashing and the rest of the functions become available for setting. After com-

pleting all settings, please, press the ON\OFF button again. Then the Fill Water indica-

tor goes off, and the appliance starts to operate.

When the appliance runs and no operating instruction has been received or malfunc-

tion has occurred for 30 seconds, the backlight of the display goes out automatically,

except the Operating Mode, Outlet Temp and Lock indicators. If there is no operation

for half a minute, the display will lock automatically, but the Lock indicator will illumi-

nate independently.

In ECO, AUTO, PROGRAM and BOOST modes, the water temperature can be selected

using the

and

The constantly showing temperature indicates the actual water temperature in the

tank.

The flashing temperature with an arrow indicates the desired water temperature.

With the basic settings, the appliance operates as a heat pump – in ECO mode – utilis-

ing the thermal energy of the external environment.

If the ambient temperature decreases below the operating parameters, the heat

pump can no longer generate the heat needed for the production of sanitary hot wa-

ter, therefore the heat pump stops, and automatically switches to the use of the auxil-

iary electrical heating enabling the auxiliary electrical heating mode. When the external

temperature conditions allow the use of the heat pump again, the electrical heating

stops and the heat pump unit restarts.

When the setting water temperature is higher than the temperature that the heat

pump can produce in itself at the given ambient temperature, the heat pump runs first

until the possible water temperature is reached, and then, the auxiliary electrical heat-

ing is activated automatically, while the heat pump stops; in the meantime, the appli-

ance ensures the continuous heating of water.

5.4. Setting the temperature:

buttons.

Table of Contents

Hp-tower hpt200c