Instructions And Warranty - hajdu HP-TOWER HPT200 Installation, Operating And Maintenance Manual

HPT 200 • HPT 200C
This manual forms an integrated and indispensable part of the appliance. Do not re-
move the data label from the appliance for any reason as these data may be required
for any possible future repair.
Please, read the warranty document supplied with the appliance carefully. This docu-
ment includes specifications regulating the warranty.
In case of failure and /or defective operation, please do not try to find and trouble-
shoot the error, but switch the appliance off and contact our service station. In case of
repair, original spare parts must be used exclusively, and any type of repair work can
only be performed by a qualified technician. Failure to observe these recommenda-
tions may endanger the safety of the appliance and invalidate the responsibility under-
taken by the manufacturer.
If the appliance is not used for a longer period of time, it is recommended to per-
form the following:
- have the appliance disconnected from the mains supply network by installing an
isolation device or switch in front of the appliance and turning it into "OFF" posi-
tion.
- close all the faucets of the household water supply pipeline
WARNING
When put out of use in a room exposed to freezing, you must empty the appliance.
This operation must be performed by a qualified professional.
WARNING
Running hot water of temperature above 50 °C may cause serious burn marks. The
maximum water temperature appearing on the display is 60 °C, which value can be
actually higher than that, in case of defective operation. Children, disabled persons
and elderly persons are highly exposed to the danger of burn marks. It is recom-
mended to connect a thermostatic mixing valve to the water outlet pipe of the ap-
pliance .
70

4.2. Instructions and warranty