hajdu HP-TOWER HPT200 Installation, Operating And Maintenance Manual page 76

HPT 200 • HPT 200C
After setting the hour, you can set the minutes using the above method.
Program mode:
In Program mode, the appliance operates in the heating cycle according to the pre-
set parameters. In Program mode, you can program a whole week in daily breakdown.
Caution: The Program mode is available only when the actual time has been prop-
erly set and the low tariff mode is disabled.
Once you have selected the Program mode, the symbol appears on the display.
In Program mode, the control automatically selects between the heat pump energy
source and the electrical heating support depending on the temperature of the air re-
ceived at the air inlet of the heat pump.
When you are in Program mode, you can access programmable functions by pressing
the OK button.
Limitation: To program periods recurring on a daily basis, it is necessary that the heat
pump has to continuously operate for at least 8 hour beforehand.
76