Table of Contents
Advertisement
198 Parameters
No.
Name / Range /
Selection
14
I/O extension
module 1
14.1
Module 1 type
None
FIO-01
FIO-11
FAIO-01
FDIO-01
14.2
Module 1 location
1...254
14.3
Module 1 status
No option
FIO-01
FIO-11
FAIO-01
14.5
DI status
Description
Configuration of I/O extension module 1.
See also section
Programmable I/O
extensions (page
65).
Note: The contents of the parameter group vary
according to the selected I/O extension module type.
Activates (and specifies the type of) I/O extension
module 1.
Note: This parameter cannot be changed while the
drive is running.
Inactive.
FIO-01.
FIO-11.
FAIO-01.
FDIO-01.
Specifies the slot (1...3) on the control unit of the drive
into which the I/O extension module is installed.
Alternatively, specifies the node ID of the slot on an
FEA-03 extension adapter.
Note: This parameter cannot be changed while the
drive is running.
Slot 1 = 1; Slot 2 = 2; Slot 3 = 3.
4...254: Node ID of the slot on the FEA-03 extension
adapter.
Displays the status of I/O extension module 1.
No module detected in the specified slot.
A module has been detected but cannot be
communicated with.
The module type is unknown.
An FIO-01 module has been detected and is active.
An FIO-11 module has been detected and is active.
An FAIO-01 module has been detected and is active.
(Visible when
14.1 Module 1 type
Displays the status of the digital inputs on the
extension module. The activation/deactivation delays
(if any are specified) are ignored. A filtering time (for
input mode) can be defined by parameter
time.
Bit 0 indicates the status of DI1.
Note: The number of active bits in this parameter
depends on the number of digital input/outputs on
the extension module.
Example: 0101b = DI1 and DI3 are on, remainder are off.
This parameter is read-only.
= FDIO-01)
14.8 DI filter
Def / Type
FbEq 16b / 32b
None / uint16
0
1
2
4
3
1 / uint16
1 = 1 / 1 = 1
No option / uint16
0
1
2
15
20
24
- / uint16
Advertisement
Table of Contents
