Warnings And Faults - ABB ACS880 N5700 Series Firmware Manual

142 Parameters
No. Name / Range /
Selection
4 Warnings and
faults
4.1 Tripping fault
0000...FFFFh
4.2 Active fault 2
0000...FFFFh
4.3 Active fault 3
0000...FFFFh
4.4 Active fault 4
0000...FFFFh
4.5 Active fault 5
0000...FFFFh
4.6 Active warning 1
0000...FFFFh
4.7 Active warning 2
0000...FFFFh
4.8 Active warning 3
0000...FFFFh
4.9 Active warning 4
0000...FFFFh
4.10 Active warning 5
0000...FFFFh
4.11 Latest fault
0000...FFFFh
4.12 2nd latest fault
0000...FFFFh
4.13 3rd latest fault
0000...FFFFh
4.14 4th latest fault
0000...FFFFh
4.15 5th latest fault
0000...FFFFh
4.16 Latest warning
0000...FFFFh
Description
Information on warnings and faults that occurred last.
For explanations of individual warning and fault codes,
see chapter Fault tracing (page
All parameters in this group are read-only unless
otherwise noted.
Code of the 1st active fault (the fault that caused the
current trip).
1st active fault.
Code of the 2nd active fault.
2nd active fault.
Code of the 3rd active fault.
3rd active fault.
Code of the 4th active fault.
4th active fault.
Code of the 5th active fault.
5th active fault.
Code of the 1st active warning.
1st active warning.
Code of the 2nd active warning.
2nd active warning.
Code of the 3rd active warning.
3rd active warning.
Code of the 4th active warning.
4th active warning.
Code of the 5th active warning.
5th active warning.
Code of the 1st stored (non-active) fault.
1st stored fault.
Code of the 2nd stored (non-active) fault.
2nd stored fault.
Code of the 3rd stored (non-active) fault.
3rd stored fault.
Code of the 4th stored (non-active) fault.
4th stored fault.
Code of the 5th stored (non-active) fault.
5th stored fault.
Code of the 1st stored (non-active) warning.
1st stored warning.
547).
Def / Type
FbEq 16b / 32b
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1
0 / uint16
1 = 1