Add Hole; Change Hole Type - Huvitz Excelon XD Operator's Manual

5.3.2 Add Hole

To add hole, press the "Add" button(
frame area.
To specify hole position accurately, press the
hole position value and then enter exact hole
position value with numeric keypad.

5.3.3 Change Hole Type

Hole editor supports two types of hole. (Hole & Slot)
"Change Hole Type" button(
Excelon XD/XQ Operator's Manual
) and then specify hole location in the
) specifies hole type to be added.
Hole
Slot
53