Table of Contents
Advertisement
4.
Pull the drive (2) away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
Audio jack
To remove the audio jack, use this procedure and illustration.
Table 5-8
Audio jack description and part number
Description
Audio jack (includes cable)
Before removing the audio jack, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the audio jack:
1.
Remove the Phillips M2.0 × 2.5 screw (1) that secures the audio jack to the computer.
2.
Release the zero insertion force (ZIF) connector (2) to which the audio jack cable is connected, and then
disconnect the cable from the system board.
56
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
45).
45).
Battery on page
47).
Spare part number
N11993-001
Hide quick links:
Advertisement
Table of Contents
