Table of Contents
Advertisement
3.
Remove the audio jack (3) from the computer.
Reverse this procedure to install the audio jack.
Connector board cable
To remove the connector board cable, use this procedure and illustration.
NOTE:
The connector board cable is included in the Cable Kit, spare part number N09040-001.
Before removing the connector board cable, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the connector board cable:
1.
Release the ZIF connector (1) to which the connector board cable is connected, and then disconnect the
cable from the system board.
2.
Release the ZIF connector (2) to which the connector board cable is connected, and then disconnect the
cable from the connector board.
Preparation for disassembly on page
Bottom cover on page
45).
45).
Battery on page
47).
Connector board cable
57
Hide quick links:
Advertisement
Table of Contents
