Table of Contents
Advertisement
6. Configurations
6.1 Front Panel Buttons
Please see the section 4.2.
6.2 Front Panel Buttons
Please see the section 4.4
6.3 KVM function
The Multiview KVM Processor can be used with a mouse and keyboard
with no configuration. A mouse with scroll wheel is recommended
when using the KVM function.
Connect the keyboard and mouse and hover to enable the screen you
wish to work on. The top-left window, HDMI 1, is the active window in
default. In quadview mode, moving the cursor to* the border of the
active window propels Multiview KVM Processor to switch the active
window automatically**. Multiview KVM Processor intercepts the
following mouse actions.
⚫
Scroll wheel: scrolling actions sync the coordinates between the
source/computer and Multiview KVM processor.
⚫
Middle button/Wheel double click:
A.
When the current layout is in quadview mode, the middle
buttion/wheel double click can bring the active window to full
screen mode.
B.
When the current layout is in full screen mode, middle
button/wheel double click switch the layout to quadview mode.
* Depend on the setting of mouse speed and accelerations in OS on
your system, you may find the active window switched before the
cursor reaches the border.
**Same as other KVMs, the mouse cursors on inactive windows will
remain on the screen.
11
Advertisement
Table of Contents
